A guide to experimental design

Published on December 3, 2019 by Rebecca Bevans. Revised on October 20, 2021.

Experiments are used to study causal relationships. You manipulate one or more independent variables and measure their effect on one or more dependent variables.

Experimental design means creating a set of procedures to systematically test a hypothesis. A good experimental design requires a strong understanding of the system you are studying.

There are five key steps in designing an experiment:

  1. Consider your variables and how they are related
  2. Write a specific, testable hypothesis
  3. Design experimental treatments to manipulate your independent variable
  4. Assign subjects to groups, either between-subjects or within-subjects
  5. Plan how you will measure your dependent variable

For valid conclusions, you also need to select a representative sample and control any extraneous variables that might influence your results

Step 1: Define your variables

You should begin with a specific research question. We will work with two research question examples, one from health sciences and one from ecology:

Example question 1: Phone use and sleep
You want to know how phone use before bedtime affects sleep patterns. Specifically, you ask how the number of minutes a person uses their phone before sleep affects the number of hours they sleep.
Example question 2: Temperature and soil respiration
You want to know how temperature affects soil respiration. Specifically, you ask how increased air temperature near the soil surface affects the amount of carbon dioxide (CO2) respired from the soil.

To translate your research question into an experimental hypothesis, you need to define the main variables and make predictions about how they are related.

Start by simply listing the independent and dependent variables.

Research question Independent variable Dependent variable
Phone use and sleep Minutes of phone use before sleep Hours of sleep per night
Temperature and soil respiration Air temperature just above the soil surface CO2 respired from soil

Then you need to think about possible extraneous and confounding variables and consider how you might control them in your experiment.

Extraneous variable How to control
Phone use and sleep Natural variation in sleep patterns among individuals. Control statistically: measure the average difference between sleep with phone use and sleep with phone use rather than the average amount of sleep per treatment group.
Temperature and soil respiration Soil moisture also affects respiration, and moisture can decrease with increasing temperature. Control experimentally: monitor soil moisture and add water to make sure that soil moisture is consistent across all treatment plots.

Finally, you can put these variables together into a diagram. Use arrows to show the possible relationships between variables and include signs to show the expected direction of the relationships.

Diagram of the relationship between variables in a sleep experiment

Here we predict that the amount of phone use will have a negative effect on hours of sleep, and predict an unknown influence of natural variation on hours of sleep.
Diagram of the relationship between variables in a soil respiration experiment

Here we predict that increasing temperature will increase soil respiration and decrease soil moisture, while decreasing soil moisture will lead to decreased soil respiration.

Step 2: Write your hypothesis

Now that you have a strong conceptual understanding of the system you are studying, you should be able to write a specific, testable hypothesis that addresses your research question.

Null hypothesis (H0) Alternate hypothesis (H1)
Phone use and sleep Phone use before sleep does not correlate with the amount of sleep a person gets. Increasing phone use before sleep leads to a decrease in sleep.
Temperature and soil respiration Air temperature does not correlate with soil respiration. Increased air temperature leads to increased soil respiration.

The next steps will describe how to design a controlled experiment. In a controlled experiment, you must be able to:

  • Systematically and precisely manipulate the independent variable(s).
  • Precisely measure the dependent variable(s).
  • Control any potential confounding variables.

If your study system doesn't match these criteria, there are other types of research you can use to answer your research question.

Step 3: Design your experimental treatments

How you manipulate the independent variable can affect the experiment's external validity – that is, the extent to which the results can be generalized and applied to the broader world.

First, you may need to decide how widely to vary your independent variable.

Soil-warming experiment
You can choose to increase air temperature:
  • just slightly above the natural range for your study region.
  • over a wider range of temperatures to mimic future warming.
  • over an extreme range that is beyond any possible natural variation.

Second, you may need to choose how finely to vary your independent variable. Sometimes this choice is made for you by your experimental system, but often you will need to decide, and this will affect how much you can infer from your results.

Phone-use experiment
You can choose to treat phone use as:
  • a categorical variable: either as binary (yes/no) or as levels of a factor (no phone use, low phone use, high phone use).
  • a continuous variable (minutes of phone use measured every night).

Step 4: Assign your subjects to treatment groups

How you apply your experimental treatments to your test subjects is crucial for obtaining valid and reliable results.

First, you need to consider the study size: how many individuals will be included in the experiment? In general, the more subjects you include, the greater your experiment's statistical power, which determines how much confidence you can have in your results.

Then you need to randomly assign your subjects to treatment groups. Each group receives a different level of the treatment (e.g. no phone use, low phone use, high phone use).

You should also include a control group, which receives no treatment. The control group tells us what would have happened to your test subjects without any experimental intervention.

When assigning your subjects to groups, there are two main choices you need to make:

  1. A completely randomized design vs a randomized block design.
  2. A between-subjects design vs a within-subjects design.

Randomization

An experiment can be completely randomized or randomized within blocks (aka strata):

  • In a completely randomized design, every subject is assigned to a treatment group at random.
  • In a randomized block design (aka stratified random design), subjects are first grouped according to a characteristic they share, and then randomly assigned to treatments within those groups.
Completely randomized design Randomized block design
Phone use and sleep Subjects are all randomly assigned a level of phone use using a random number generator. Subjects are first grouped by age, and then phone use treatments are randomly assigned within these groups.
Temperature and soil respiration Warming treatments are assigned to soil plots at random by using a number generator to generate map coordinates within the study area. Soils are first grouped by average rainfall, and then treatment plots are randomly assigned within these groups.

Sometimes randomization isn't practical or ethical, so researchers create partially-random or even non-random designs. An experimental design where treatments aren't randomly assigned is called a quasi-experimental design.

Between-subjects vs. within-subjects

In a between-subjects design (also known as an independent measures design or classic ANOVA design), individuals receive only one of the possible levels of an experimental treatment.

In medical or social research, you might also use matched pairs within your between-subjects design to make sure that each treatment group contains the same variety of test subjects in the same proportions.

In a within-subjects design (also known as a repeated measures design), every individual receives each of the experimental treatments consecutively, and their responses to each treatment are measured.

Within-subjects or repeated measures can also refer to an experimental design where an effect emerges over time, and individual responses are measured over time in order to measure this effect as it emerges.

Counterbalancing (randomizing or reversing the order of treatments among subjects) is often used in within-subjects designs to ensure that the order of treatment application doesn't influence the results of the experiment.

Between-subjects (independent measures) design Within-subjects (repeated measures) design
Phone use and sleep Subjects are randomly assigned a level of phone use (none, low, or high) and follow that level of phone use throughout the experiment. Subjects are assigned consecutively to zero, low, and high levels of phone use throughout the experiment, and the order in which they follow these treatments is randomized.
Temperature and soil respiration Warming treatments are assigned to soil plots at random and the soils are kept at this temperature throughout the experiment. Every plot receives each warming treatment (1, 3, 5, 8, and 10C above ambient temperatures) consecutively over the course of the experiment, and the order in which they receive these treatments is randomized.

Step 5: Measure your dependent variable

Finally, you need to decide how you'll collect data on your dependent variable outcomes. You should aim for reliable and valid measurements that minimize bias or error.

Some variables, like temperature, can be objectively measured with scientific instruments. Others may need to be operationalized to turn them into measurable observations.

Phone use experiment
In your experiment about phone use and sleep, you could measure your dependent variable in one of two ways:
  • Ask participants to record what time they go to sleep and get up each day.
  • Ask participants to wear a sleep tracker.

How precisely you measure your dependent variable also affects the kinds of statistical analysis you can use on your data.

Experiments are always context-dependent, and a good experimental design will take into account all of the unique considerations of your study system to produce information that is both valid and relevant to your research question.

Frequently asked questions about experiments

What is experimental design?

Experimental design means planning a set of procedures to investigate a relationship between variables. To design a controlled experiment, you need:

  • A testable hypothesis
  • At least one independent variable that can be precisely manipulated
  • At least one dependent variable that can be precisely measured

When designing the experiment, you decide:

  • How you will manipulate the variable(s)
  • How you will control for any potential confounding variables
  • How many subjects or samples will be included in the study
  • How subjects will be assigned to treatment levels

Experimental design is essential to the internal and external validity of your experiment.

What are independent and dependent variables?

You can think of independent and dependent variables in terms of cause and effect: an independent variable is the variable you think is the cause, while a dependent variable is the effect.

In an experiment, you manipulate the independent variable and measure the outcome in the dependent variable. For example, in an experiment about the effect of nutrients on crop growth:

  • Theindependent variableis the amount of nutrients added to the crop field.
  • Thedependent variable is the biomass of the crops at harvest time.

Defining your variables, and deciding how you will manipulate and measure them, is an important part of experimental design.

What is a confounding variable?

A confounding variable, also called a confounder or confounding factor, is a third variable in a study examining a potential cause-and-effect relationship.

A confounding variable is related to both the supposed cause and the supposed effect of the study. It can be difficult to separate the true effect of the independent variable from the effect of the confounding variable.

In your research design, it's important to identify potential confounding variables and plan how you will reduce their impact.

Is this article helpful?

You have already voted. Thanks :-) Your vote is saved :-) Processing your vote...